You are here: Home / Products / Gate Openers / Swing Gate Opener / Automatic Swing Gate Opener with WiFi Control

Wifi Electr Automatic Electric Swing Gate Opener

Automatic Swing Gate Opener with WiFi Control

The OMKER DCK-23 push-rod type WiFi intelligent sliding door motor is a new generation of convenient intelligent door control solution specifically designed for commercial buildings, shopping centers, gated communities and high-end hotels. It adopts revolutionary integrated electronic limit technology, completely eliminating traditional mechanical limit switches. The travel mode can be directly adjusted through software, reducing the installation and debugging time by more than 50%. The product is available in two power configurations of 200W and 250W. The maximum load capacity of a single door can reach 1000KG, perfectly suitable for various materials and styles of sliding doors such as aluminum doors, iron gates, copper doors and wooden doors.

Boom Type:
Linear Arm
Drive Type:
AC, DC

Quantity:
Availability:





Inquire Add to Basket

>> Introduction

The OMKER DCK-23 Automatic Swing Gate Opener is a linear arm gate operator designed for powered opening and closing of residential, commercial, and property entrance swing gates. Its push-rod drive mechanism and adjustable limit switches help installers set the required gate travel according to the entrance layout.

The DCK-23 is suitable for single or double swing gate installations when paired with an appropriate control system. WiFi-enabled configurations can provide convenient remote operation through a compatible control module, while the mechanical key release allows users to operate the gate manually during power interruptions.

With a robust worm gear mechanism, adjustable opening positions, and flexible bracket installation, this electric swing gate opener is a practical choice for gate automation projects.

Model	Specification
Model Number	DCK-23
Warranty	1 Year
After-sale Service	Free spare parts
Application	Hotel
Design Style	Modern
Place of Origin	China(mainland)
Brand Name	Omker
Product name	Push rode type swing gate operator
Power supply	AC 120V~240V 50/60Hz
Power	200W/250W
Max gate weight	600-1000KG
Motor speed	1400r/min
Travel time	17S
Noise	≤56dB
Temperature	-45℃~+65℃
Protection class	IP44
Certificate	CE

Gate Size and Weight Capacity

The DCK-23 swing gate operator supports different gate leaf dimensions, with the allowable weight decreasing as the gate leaf becomes wider. Before installation, gate weight, hinge condition, wind exposure, and mounting geometry should be checked to determine whether the operator is suitable for the project.

Gate Leaf Width	Maximum Gate Leaf Weight
2.0 m	1000 kg
2.5 m	800 kg
3.0 m	600 kg
4.0 m	500 kg
5.0 m	400 kg

Figures are the manufacturer's stated width-to-weight limits for one gate leaf. They are not an unconditional 1000 kg rating for every gate size.

This information helps gate manufacturers and installers select an appropriate operator without relying on a single maximum-weight figure.

Installation Requirements and Opening Angles

The DCK-23 linear arm swing gate opener uses adjustable front and rear mounting brackets to accommodate different gate post arrangements. Correct bracket positioning is essential for achieving the desired opening angle and maintaining suitable operating force.

The following installation dimensions are provided in the DCK-23 user manual.

Opening Angle	A	B	C Max.	E
90°	200 mm	200 mm	120 mm	920 mm
130°	200 mm	140 mm	70 mm	920 mm

Before installation, confirm that the gate structure is strong enough, the hinges move freely, and a mechanical gate stop is installed in the closed position.

The rear bracket should be mounted according to the specified A and B measurements, while the front bracket must remain horizontally aligned with the rear bracket.

For professional installation, refer to the DCK-23 Series Motor User Manual for detailed mounting arrangements and wiring diagrams.