01 / LOAD MATCHING
One Motor Cannot Cover Every Gate Weight
Project loads can range from 500 kg to 3000 kg. A single power and torque rating cannot match light residential gates and heavy industrial entrances equally well.
Integrated Sliding Gate Automation
200 Series Sliding Gate Motor
Five integrated AC sliding gate motor configurations cover gates from 500 kg to 3000 kg—giving installers, engineering contractors and distributors one coordinated series for residential, commercial and industrial projects.
500–3000 kg gate rangeBuilt-in control boardManual release for outages
Project Background
One Series for Every Sliding Gate
Sliding gates used at villas, commercial compounds, industrial parks and factories vary sharply in weight and operating demands. A light residential entrance and a 3000 kg industrial gate should not rely on the same motor output.
The OMKER 200 Series combines five motor variants across four application settings. Rack-and-pinion drive, single-phase AC power and integrated controls help project teams match the operator to the actual gate load while keeping installation and operation consistent.
Residential Entrances
Commercial Properties
Industrial Parks
Factory Gates
Customer Pain Points
Common Gate Motor Challenges
These recurring issues increase installation time, operating risk and after-sales pressure for contractors and distributors.
02 / INSTALLATION
Separate Controllers Add Wiring Work
External control boxes create more mounting, cabling and connection steps, increasing installation complexity and the number of potential fault points.
03 / SAFETY
Fixed Force and Inaccurate Limits Create Risk
Without precise travel learning, adjustable motor force and sensitive obstacle response, a gate may stop incorrectly or apply unnecessary closing force.
04 / POWER FAILURE
Manual Access Becomes Difficult During Outages
A system without a dedicated clutch release can leave users struggling to move the gate manually when the power supply is interrupted.
Our Solution
Integrated Power, Smarter Protection
The 200 Series combines the motor, mechanical drive and control board in an all-in-one structure, while five configurations provide a practical selection range for different gate weights.
370–1200 WRated motor power
18–65 NmMaximum torque
500–3000 kgMaximum gate weight
12 m/minTravel speed
IP44Protection class
-45°C to +65°COperating temperature
Single-phase AC input120 V or 220–240 V, 50/60 Hz configurations listed by OMKER.
Controlled operating noiseThe published series specification lists noise below 56 dB.
CE listed across the seriesThe official specification table identifies CE certification for all five options.
Key Features
Smarter Installation and Control
The integrated architecture combines setup convenience with adjustable operating and safety functions.
Built-In Integrated Control Board
The mechanical and electronic sections are integrated in the operator, removing the need for a separate external controller and reducing field wiring.
Travel Learning and Adjustable Force
Stroke learning supports accurate open and close positioning. Motor force and obstacle sensitivity can be adjusted for the installed gate.
Obstacle Response and Closing Delay
The gate can stop and reopen when resistance is detected. Automatic closing time can be adjusted from approximately 3 to 120 seconds.
Thermal Protection and Key Release
Thermal protection helps protect the motor from overheating, while a dedicated key releases the clutch for manual movement during a power failure.
Rolling-Code Remote Control
The control system uses rolling-code remote technology for everyday gate operation and authorized access.
Optional Connected Management
Optional WiFi or Bluetooth mobile-app management can support connected operation. OEM and ODM requirements can be discussed with OMKER.
Product Lineup
200 Series Specification Matrix
Use maximum gate weight as an initial filter, then confirm gate condition, duty requirements, site power and safety accessories before selection.
| Model | Max Gate Weight | Motor Power | Output Torque | Speed | Working Temp. | Recommended Application |
|---|---|---|---|---|---|---|
| DCK-200 | 500 kg | 370 W | 18 Nm | 12 m/min | -45°C to +65°C | Light residential sliding gates |
| DCK-200 | 1200 kg | 550 W | 35 Nm | 12 m/min | -45°C to +65°C | Residential and light commercial entrances |
| DCK-200 | 1600 kg | 750 W | 40 Nm | 12 m/min | -45°C to +65°C | Commercial compounds and larger villa gates |
| DCK-200 | 2000 kg | 900 W | 50 Nm | 12 m/min | -45°C to +65°C | Industrial parks and regular factory access |
| DCK-200 | 3000 kg | 1200 W | 65 Nm | 12 m/min | -45°C to +65°C | Heavy industrial sliding gate projects |
All five configurations are listed with single-phase AC input, IP44 protection, published noise below 56 dB and CE certification. Recommended applications are selection guidance; final suitability depends on the actual gate and site.
Project Value
Project Value for Gate Professionals
A coordinated series supports faster project matching and a more consistent installation and support process.
Full Load and Application Coverage
Five configurations cover light residential gates through heavy industrial entrances, supporting one-stop selection across mixed project portfolios.
Lower Installation Complexity
The integrated control board removes an external controller from the layout, helping reduce mounting, wiring and troubleshooting steps.
Safer, More Serviceable Projects
Adjustable force, obstacle response, thermal protection and key release address common sources of complaints and service visits.
Selection FAQ
200 Series FAQs
How many gate weights does the 200 Series cover?
The official lineup lists five maximum gate-weight options: 500 kg, 1200 kg, 1600 kg, 2000 kg and 3000 kg.
Does the operator require an external control box?
The published product description states that the mechanical and electronic sections are integrated with a built-in control panel, so an additional external controller is not required.
What happens when the gate detects an obstacle?
The operator supports adjustable obstacle sensitivity and can stop and reopen when resistance is detected. OMKER also recommends adding photocells for safety.
Can users open the gate during a power failure?
Yes. A special key releases the clutch so authorized users can push the gate manually when power is unavailable.
Can the automatic closing time be adjusted?
Yes. The published FAQ states that the closing time can be adjusted from approximately 3 to 120 seconds.
Does the series support mobile-app control?
Optional WiFi or Bluetooth mobile-app management is listed for the solution. Confirm the required control option and compatibility when requesting a quotation.
Project Inquiry
Match the 200 Series to Your Sliding Gate Project
Send the gate weight, opening width, usage frequency, power supply, destination market and required controls. OMKER can help narrow the appropriate configuration and discuss optional connectivity or OEM/ODM requirements.
