OMKER / Sliding Gate Automation

Chain Gate Openers
for Sliding Gates

Compare OMKER chain drive gate operators by gate weight, mounting requirements, and control options.

Compare Chain Gate Openers
Drive system

How a Chain Drive Gate Opener Works

A motor turns a sprocket that engages the drive chain. As the chain moves, it pulls the gate along its travel path. In a rack-and-pinion system, the motor instead engages a toothed rack attached to the gate.

When replacing an operator, check the existing drive system and mounting arrangement first. A chain drive and a gear rack are not interchangeable by default.

CHAIN DRIVE MECHANISMConceptual diagram · Not model-specific OPERATOR HOUSING 01 Motor02 Reduction stage 03 Drive sprocket04 Drive chainGate travel
Product comparison

Compare Chain Drive Gate Operators

Compare three OMKER chain-drive listings. The chain-drive listings share DCK configurations, so choose by model, installation layout and included controls rather than by listing title alone.

Chain drive · Compact housing

1200 kg Heavy-Duty Chain Gate Opener

OMKER chain gate motor kit
  • AC power
  • DCK-333: 500 kg / 370 W
  • DCK-334: 800 kg / 450 W
  • DCK-335: 1,200 kg / 550 W

Compact snap-on design. The 1,200 kg rating applies to DCK-335.

View Product Details
Chain drive · Driveway gates

Heavy-Duty Chain Driveway Gate Operator

Chain driveway gate operator assembly
  • AC power
  • DCK-333: 500 kg / 370 W
  • DCK-334: 800 kg / 450 W
  • DCK-335: 1,200 kg / 550 W

For sliding driveway gates. Confirm the mounting arrangement before ordering.

View Product Details
Chain drive · App option

Chain Sliding Gate Opener with Remote & App Control

OMKER chain motor with sprockets
  • AC power
  • DCK-333: 500 kg / 370 W
  • DCK-334: 800 kg / 450 W
  • DCK-335: 1,200 kg / 550 W

The listing describes remote and app control. Confirm module and package contents.

View Product Details

Same Load Options. Different Buying Priorities.

Choose the DCK model for your gate weight first. Then compare the housing, mounting layout and control package.

Compare byCompact HousingDriveway GateRemote & App
What stands outSnap-on housingDriveway gate applicationRemote and app control listed
When to shortlistCabinet footprint and service clearance are priorities.You’re matching an operator to a sliding driveway gate.Phone-based access is part of the project brief.
Check before orderingHousing dimensions and clearance around the unit.Mounting position, chain alignment and mounting hardware.Whether the app module and remotes are included in the quoted package.

Shared AC model range: DCK-333 · 500 kg / 370 W   |   DCK-334 · 800 kg / 450 W   |   DCK-335 · 1,200 kg / 550 W

Confirm the exact voltage, supplied accessories and model configuration before ordering. A gate weight rating does not establish the allowable duty cycle.

Explore the full range

Find the Right Sliding Gate Opener

Start with your gate, not the motor. Browse chain and rack-and-pinion options, then narrow your shortlist by gate weight and available power.

Browse Sliding Gate Openers
Selection guide

Choosing a Heavy Duty Sliding Gate Opener

Weight and frequency

Confirm the moving gate weight and estimate the cycles during your busiest period. Ask for the duty rating of the exact configuration; do not use motor wattage as a substitute.

Travel and mounting

Check that the gate travels freely and that the operator, drive chain and fixing points can fit the installation. Correct mechanical binding before choosing a motor.

Power and controls

Match the available supply to the nameplate and confirm whether remotes, an app module or an access-control interface are included or optional.

Fitting an Opener to a Chain Link Fence Gate

If you are looking for a chain link fence gate opener, check the sliding gate frame and attachment points, not just the mesh. “Chain link” describes the fence material; “chain drive” describes how the operator moves the gate.

Installation

Chain Drive Sliding Gate Opener Installation

  1. Check the gate and mounting spaceConfirm smooth manual travel, secure gate hardware and the mounting space required by the selected model.
  2. Mount the operator and align the chainUse the model-specific mechanical instructions for base location, chain routing, fixing points and tension. The K393 manual does not specify those dimensions.
  3. Verify the controller and limitsOnly if the operator has the matching K393 board, refer to its manual for travel setup, direction, remote pairing and compatible safety inputs. A qualified installer should isolate power before wiring or adjustment.
  4. Test before handoverKeep the travel area clear. Verify both stopping positions, control response and fitted safety devices before enabling any automatic closing function.
View Installation Manual
K393E control board wiring diagram
Common questions

Chain Gate Opener FAQs

Is a chain drive the same as rack and pinion?

No. A chain drive engages a chain through a sprocket; rack and pinion uses a toothed rack. Confirm the drive type before buying replacement parts.

Can I use a chain drive opener on a chain-link sliding gate?

Possibly. The gate must slide freely and have a suitable frame, mounting arrangement and weight rating. Verify these with the installer.

Which DCK model is listed for a 1,200 kg gate?

The DCK-335 is listed at 1,200 kg and 550 W. Ask OMKER to confirm suitability for your gate, travel conditions and operating frequency.

Do the three listings offer different motor models?

No. The chain-drive listings include overlapping DCK variants.

Does the app require a separate module?

Confirm the exact package before ordering. The relevant listing describes app connectivity, but the module and setup requirements should be checked for the supplied unit.

Does the K393 manual apply to every listed operator?

No. Use it only when the supplied control-board model and revision match. Follow the selected operator’s mechanical manual separately.

Can I choose a motor by gate weight alone?

No. Consider gate travel, usage frequency, power supply, mounting space and control requirements as well.

What should I provide when requesting a quote?

Send the gate weight and width, a photo of the mounting area, the available supply and your expected operating frequency and control needs.

Confirm the Right Operator for Your Gate

Send your gate dimensions, operating frequency, available power and a photo of the installation area.

Contact OMKER
 +86-591-87596811
Celine Chen
Mob: +86-182-5092-8002
Wechat: +86-182-5092-8002
WhatsApp: +8618250928002
Email: sale12@omker.com
Rena Lin
Mob: +86-186-0591-5579
Wechat: +86-186-0591-5579
WhatsApp: +8618605915579
Email: sale17@omker.com
Skype: rena-lin
Sunny Wang
Mob: +86-135-9982-5685
Wechat: +86-135-9982-5685
WhatsApp: +8613599825685
Email: sale19@omker.com
Skype: jingwang074@hotmail.com

Copyright © 2025 Fujian Omker Intelligent Technology Co., Ltd. All Rights Reserved. Sitemap I Privacy Policy    闽ICP备2023007294号-1